ProX Blitzz Operators Manual
Page 8
Version: 1.35 (8/7/2018 5:32 PM AD)
Safe Distance
KEEP AUDIENCE AND FLAMMABLE MATERIALS AT A MINIMUM SAFETY DISTANCE OF 10 FEET. KEEP OUT OF REACH OF
THE PUBLIC! MAINTAIN A 3 FOOT EXCLUSION ZONE AROUND EACH MACHINE WITH NOTHING BUT THE POWER AND
CONTROL CABLES IN THIS AREA!
In Case of Emergency
IF THE MACHINE NEEDS TO BE STOPPED QUICKLY DUE TO AN EMERGENCY, PRESS THE “PAUSE” / “STOP” KEY ON THE
CONTROLLER TO STOP THE MACHINE AND TURN THE POWER SWITCH ON THE PANEL OF THE MACHINE TO THE “OFF” POSITION.
CALL FOR MEDICAL ASSISTANCE AS REQUIRED.
Noise Emissions
THE NOISE EMISSION LEVEL FROM THIS MACHINE DOES NOT EXCEED 80 DB. THERE IS NO HAZARD TO HEARING AND, THEREFORE,
NO LEGAL REQUIREMENT FOR EAR PROTECTION TO BE WORN WHEN WORKING IN THE VICINITY OF THIS MACHINE.
Cleaning
PLEASE INSPECT FOUNTAIN NOZZLE OF THE BLITZ MACHINE BEFORE USE AND CONFIRM THERE ARE NO ACCUMULATED
GRANULES. PLEASE CLEAN OUT ANY EXCESS BY INVERTING THE UNIT TO CLEAN OUT PORT. THIS SHOULD BE DONE EACH TIME
BEFORE THE MACHINE IS SETUP AND BE PERFORMED BEFORE RETURING THE UNITS TO THEIR ROAD CASE. THIS WILL HELP TO
PROLONG THE LIFE OF THE BLITZ MACHINE. THE FOUNTAIN PORT CAN BE CLEANED WITH A BOTTLE BRUSH AS NECESSARY. AN
AUTOMATED QUICK CLEAN CAN BE PERFORMED BY PRESSING THE #2 BUTTON ON THE WIRELESS REMOTE AND HOLDING FOR 15 SECONDS TO
START CLEAN CYCLE, PRESS #2 AGAIN TO STOP.
Power Supply Requirement
POWER REQUIREDMENTS ARE 115VAC 5 AMPS EACH. PLEASE NOTE: ONE STANDARD 15 AMP CIRCUIT SHOULD SUPPORT A
MAXIMUM OF 3 PROX BLITZ MACHINES IN NORMAL OPERATIONS. EACH MACHINE CAN BE CONNECTED INDIVIDUALLY OR
DAISY CHAINED WITH POWER-CON SERIES CABLES FOR UP TO 3 MACHINES MAXIMUM ON ONE CIRCUIT.
Xstatic Pro, Inc. - ProX
901 Essex Street, Brooklyn, NY 11298
Voice 718.237.2299 – Fax: 718.237.2318
Email: [email protected]
(NO DIRECT SALES, DEALERS AND DISTRIBUTORS ONLY)
Register your products on ProXDirect.com
