ProX Blitzz Operators Manual
Page 5
Version: 1.35 (8/7/2018 5:32 PM AD)
W-3 Wireless Receiver 1pc:
Wireless RF Controllers:
W-3 Controller Usage Instructions
：
#1 - START (Push to Start, Push #2 to Stop)
#2 - STOP (Manual Shut Down) - Power Clean AFTER WARMUP! (Push and hold #2
for more than 15 seconds to start clean cycle, it will run 15 seconds or Press #2
again to stop
#3 - Duration time 10s (the machine will run continuously 10 seconds)
#4 - Open group-1
（
wireless ADDR=1
）
(press down the button— turns on #2 to
stop)
#5 - Duration time 20s (the machine will run continuously 20 seconds)
#6 - Open group-2
（
wireless ADDR=2
）
(press down the button—turns on #2 to
stop)
#7 - Duration time 30s (the machine will run continuously 30 seconds)
#8 - Open group-3
（
wireless ADDR=3 (press down the button— turns on #2 to stop
)
W-3 Receiver /Dip Switch Usage Instructions
：
When the machine is ready to spark, the ready LED will glow.
There are 3 Channels (Dip 1-3) CAN SELECT for group-1, group-2, group-3
Instructions are printed on the back of the wireless controllers!
W-3 Wireless Controller
Wired Remote:
After pre-heating, Press the button once to start effects:
1.
Ensure that the power outlet matches that of the required voltage for your machine.
Do not EVER remove or lift the grounding of the unit.
2.
The unit should be used in a well ventilated area. NEVER COVER THE FOUNTAIN PORT
WITH ANYTHING WHEN IN USE.
a.
Before filling powder you should turn off the power. If any consumables fall into the
interior of the unit, immediately disconnect the power cord.
b.
The unit is not waterproof in any manner. If moisture or liquid enters the machine, unplug the
power cord and allow to dry.
c.
Under no circumstances should you try to operate the Blitzz machines if you do not have the
appropriate qualifications and certification! It may result in personal injury or damage the unit.
d.
Only for professional adult use, keep safe distance from spectators and/or guests
e.
Keep away from flammable and explosive goods.
f.
Maintain a clear, exclusionary, 3 foot radius around the machine when in use and a 10 foot radius
safety area. The fountain nozzle area temperature can become quite hot during operation, do not
touch this area during use or immediately following usage.
g.
Allow time for cooling between bursts and after operation is complete.
h.
If you experience excessive fog output, litter spark, pump noise or no spark output at all,
Disconnect and discontinue use immediately. Check fluid level, powder, the external fuse, remote
