6
Prowise iPro Mobile Lift
Initialisation procedure (aligning the lift columns)
Use
1. The lift is initialised by pressing the down button (-) on the foot controller.
2. Hold down the (-) button until the columns have reached the lowest position.
3. Press the down button (-) again and hold it until the columns automatically move approximately 3mm up and
down.
4. Release the down button (-) when the lift has completely stopped moving.
5. If you release the down button (-) before the initialisation process has finished, you will interrupt the
initialisation process. Repeating the previous steps is then required.
1. The range of operation of the lift must
be free from obstacles. Make sure there
are no objects or persons under the lift
when adjusting it in height and make sure
no body parts get stuck between the
touchscreen and another object.
2. The mobile lift is equipped with anti-
collision sensors, which will stop the
lift from moving as soon as it meets
resistance. This prevents damage to the
lift and the touchscreen installed on it.
