Prowinch PWCD Series User Manual Download

Page: 53 / 62

Mitsubishi Meiki Engine

Version 1.0 | 54

First 25 hours and each 50 hours of operation

Change the engine oil

Clean maintain the spark plug

(Only the first 25 hours)
While the engine is still warm, drain
the oil from the drain plug and re-
place it with new oil.

Remove the carbon attached to the
electrode, polish the electrode with
emery paper, and adjust the electrode
gap.

Burns could be caused by hot oil touching the skin, so be sufficiently careful.

Inspection and cleaning of the fuel cock (Cock with strainer cup specification only)

Remove the strainer cup of fuel cock , remove the deposit in the cup and clean the net.

Manufacturer name

Product No.

Spark plug product Nos.

NGK

BP6HS

BPR6HS

Denso

W20FP

W20FPR

Champion

NHSP*

L66Y

E6TC

RL82YC

E6RTC

* Nanjing Huade Spark Plug Co., Ltd.

Oil Gauge

Drain Plug

Summary of Contents for PWCD Series































































Search results

Summary of Contents for PWCD Series

Reviews:

Related manuals for PWCD Series

Brands by name

Popular brands

Prowinch PWCD Series, User Manual

Search results

Summary of Contents for PWCD Series

Reviews:

Related manuals for PWCD Series

Brands by name

Popular brands