Proware EN-1400A-ADC User Manual Download

Page: 57 / 187

NAS System

User Manual

3.1.3 Share/Security

Click the Share/Security tab. The Share and Security Configuration window will be displayed.

In this window, you can configure the protocol settings as well as assign share access
permission.

Share/Security Information Screen:

Share Folder

– Displays the share folder name.

Volume

– Shows the volume name where the share was created.

Windows (Samba)

– Shows the status if Samba / CIFS protocol is enabled (Yes) or

not (No) in the share folder.

UNIX/Linux (NFS)

– Shows the status if NFS protocol is enabled (Yes) or not (No)

in the share folder.

Mac (AFP)

– Shows the status if AppleTalk protocol is enabled (Yes) or not (No) in

the share folder.

Rsync

– Shows the status if Rsync is enabled (Yes) or not (No) in the share folder.

Share/Security Options:

Create Share Folder

– Used to create a new share folder.

Edit Share Folder

– Used to edit settings of an existing share folder.

Refresh

– Used to update the information displayed in the screen.

Summary of Contents for EN-1400A-ADC




























































































































































































Search results

Summary of Contents for EN-1400A-ADC

Reviews:

Related manuals for EN-1400A-ADC

Brands by name

Popular brands

Proware EN-1400A-ADC, User Manual

Search results

Summary of Contents for EN-1400A-ADC

Reviews:

Related manuals for EN-1400A-ADC

Brands by name

Popular brands