Proware EN-1400A-ADC User Manual Download

Page: 34 / 187

NAS System

User Manual

Chapter 3 proNAS Manager

There are six management functions used to configure or manage the NAS.

Network

System

Storage/Share

Account

Data Backup

File Manager

3.1 Storage/Share

3.1.1 RAID / Disk Information

Click the Storage/Share icon then select RAID / Disk Information tab. The RAID
Configuration and Disk Information window will be displayed.

NOTE: The Storage/Share

RAID function is normally used when

creating a customized RAID configuration. This can be used when the
Quick Setup has not been done yet, or Quick Setup has already been
done but the RAID will be expanded using new disk drives.

Summary of Contents for EN-1400A-ADC




























































































































































































Search results

Summary of Contents for EN-1400A-ADC

Reviews:

Related manuals for EN-1400A-ADC

Brands by name

Popular brands

Proware EN-1400A-ADC, User Manual

Search results

Summary of Contents for EN-1400A-ADC

Reviews:

Related manuals for EN-1400A-ADC

Brands by name

Popular brands