NAS System
22
User’s Manual
2.6 Preparing the System
1.
Attach network cable to Ethernet port LAN0. Connect the other end to your
network switch. You may also connect the other Ethernet LAN1 port if needed.
2.
Connect monitor to the VGA port.
3.
Connect USB keyboard and mouse or
Connect PS/2 keyboard and mouse to the USB-to-PS/2 converter cable, and then
connect the USB connector to the USB port on the Server.
2.7 Powering On
1.
Plug in the two power cords into the AC Power Input Socket of PSU located at the
rear of the NAS System.
NOTE: The NAS System is equipped with redundant, full range
power supplies with PFC (power factor correction). The system
will automatically select voltage.
2.
Press the Power On/Off Switch at the front of the NAS system.
3.
The Power LED on the front Panel will turn blue.
