NAS System
18
User’s Manual
2.5 Installing Hard Drives
2.5.1
Installing 3.5” Disk in a Disk Tray
a.
Press the release button then pull outward on the handle.
b.
Place the 3.5” hard drive in the disk tray. Align the HDD screw with the two pins
on the side of the tray. Press the other side of HDD downward to the tray.
c.
Turn the disk tray upside down. Align the three screw holes of the disk drive in
the three Hole 3.5 of the disk tray. To secure the disk drive into the disk tray,
tighten three screws on these holes of the disk tray. Note in the picture below
where the screws should be placed in the disk tray holes.
NOTE: The mounting hole locations of the new 6-disk are different
from the existing drives.
