background image

 

 

persons. 

 

Always  plug  heaters  directly  into  a  wall  outlet/receptacle.  Never  use  with  an 
extension cord or relocatable power tap (outlet/power strip). 

 

Check  if  the voltage  indicated  on  the  nameplate  of  the  appliance  corresponds 
to the local mains voltage before you connect the appliance. 

 

The appliance is not located immediately below a wall socket-outlet.   

 

The  casing  and  the  front  cover  of  the  appliance  become extremely  hot  during 
operation.  Pay  attention  that,  no  combustible  material  due  to  wind  or  other 
environmental  influences  covers  or  obstructs  the  appliance,  such  as  curtains, 
marquees,  flags,  plastic  foil  etc.  Do  not  touch  the  appliance.  Caution!  Risk  of 
scald injury! 

 

In  case  of  improper  use,  there  is  a  risk  of  electrical  shock  and/or  fire  hazard. 
Operation  of  the  appliance  must  be  discontinued  and  remove  the  mains  plug 
immediately. Do not try to repair the appliance by your-self. Please contact with 
the service agent or a suitably qualified electrician for maintenance. 

 

Remove  the  plug  from  the  power  outlet  and  wait  until  the  appliance  is 
sufficiently cooled off before cleaning. 

 

Keep  out  of  reach  of  children.  In  order  to  keep  children  from  the  dangers  of 
electrical  appliances,  never  leave  them  unsupervised  with  the  machine. 
Consequently,  when  selecting  the  location  for  your  machine,  do  so  in  such  a 
way that children do not have access to the machine. Children being supervised 
not to play with the appliance. 

 

The  appliance  must  only  be  mounted  by  an  authorized  specialist,  paying 
attention  to  the  relevant  regulations  of  the  power  supply  companies  and  the 
regional construction regulations. 

 
 
 
 
 
 

Summary of Contents for PVMA1500 AGR STD











Reviews: