ProVolver Setup
Page 4 | 7
STEP 3 : ATTACH MAGNETIC BRACKET AND MAGCUP (FRONT HAND)
For this last step you will need the front magnetic
bracket and both M4x12 screws*.
*The screws are either on the magnet or in the N°4 bag.
You can place the bracket either on position 1 (higher) or
position 2 (lower) as shown above depending on your
appreciation.
Screw it in place.
Put the front MagCup on the Magnetic support.
Loosen the screw using the bigger Allen key to adjust it.
Slot the controller in the MagCup.
Adjust your front hand ingame and tighten the srew back.
Congratulations!
Your ProVolver is now ready to be paired.
You can now follow the
to connect it to your gear and enjoy the recoil in your favorite shooters!
Position 1
Position 2
