14
15
16
17
18
19
Put the ear protectors into the
active position so that they fit
closely over your ears.
1.4 Adjusting the ear protectors:
To adjust for optimal height, push the
ear protectors up or down until they fit
comfortably over your ears.
To put the ear protectors back into the
stand-by position, pull them outward
a little and push them back with two
fingers (also see Fig. 14).
Stand-by position
Active position
The pressure, with which the ear pieces fit
over the ears, can be adjusted. To do so,
remove the ear protectors (in the active
position, Fig. 15). «Press» on the red tab
to pull the ear protectors from the shell of
the helmet.
Now turn the pressure regu-
lator with a 1- or 2-cent coin
(10 or 50 centime CHF) to
increase (+) or decrease (-)
the pressure.
Take the ear protection incl. bracket and
slide it into the corresponding clasp.
Attention!
The arrows on the ear pie-
ces should point to the front of the helmet
(Fig. 15 and 16).
GB
