Page 6 of 69
Proton Products InteliSENS DG2030 Diameter Gauge Instruction Manual (Issue 1a)
I
NTRODUCTION
G
AUGE
DG2030
WITH
CDI4
DISPLAY
The InteliSENS DG2030 Dual Axis Laser Scanning Diameter Gauge provides fast, accurate and
repeatable diameter measurements of cables or other objects manufactured in a continuous process.
The DG2030 measures objects or cables up to 30 mm in diameter, by a non-contact method. The
gauge contains a dual-axis optical scanning system and a processing circuit to produce diameter and
statistical data.
When fitted with the optional CDI4 interface display unit, the InteliSENS DG2030 diameter gauge can
operate as a standalone unit.
RS-232, RS-422, RS-485 and Ethernet communication interfaces are installed as standard for
straightforward connection to computers or PLCs. Optional industrial standard communication
interfaces (PROFIBUS, PROFIBNET, EtherNet/IP or WiFi) can be specified for installation at time of
manufacture.
Analogue and pulsed line speed inputs are fitted as standard to provide line speed data to the gauge
for optional PI feedback control and SMFD (Single Measurement Flaw Detection).
User configurable logic inputs are provided as standard to reset gauge measurements and trigger
printing. User configurable relay outputs are provided as standard to signal gauge status, lump and
neck detection and measurements exceeding preset error limits.
