Protekt AT-014-2, Instruction Manual, Page: 15 / 24

15/24
SECTION 5 - RESCUE ACCORDING TO EN 1496/B
RULES FOR RESCUE:
1. ONE attachment point can be used ONLY by ONE person at the same time.
2. Maximum TWO people can be attached to the available attachment points at the same time.
3. ONLY ONE trolley can be used for rescue purposes at the same time.
4. ALWAYS USE Trolley "A" detent pin for lock Trolley "A" position during rescue using RUP series rescue lifting devices
and CRW 300 device.
GENERAL PRECAUTIONS FOR RESCUE:
• Secondary fall arrest system (conforming EN 363) must be used when working with the TM 12-2 and RUP 502-A /
RUP 503.
• Fall arrest and rescue systems used with this device MUST MEET applicable EN standards requirements (EN 795 for
anchor devices; EN 362 for connectors; EN 361 for full body harnesses; EN 360 for retractable type fall arresters; EN 1496
for rescue lifting devices; EN 1497 for rescue harnesses; EN 341 for descender devices).
• For rescue purposes with RUP 502-A / RUP 503 rescue lifting devices always USE SDW energy absorber
(component of RUP 502-A and RUP 503 lifting devices).
• During installing rescue lifting devices RUP 502-A / RUP 503 or CRW 300 (with AT 172 fixing adapter) locking pin
MUST BE embedded in locking hole. Only then rescue lifting device can be safely and firmly installed on the
reinforced hexapod leg.