Protege PRT-CTRL, Installation Manual, Page: 6 / 36

4 Protégé System Controller Installation Manual
(3000ft). Communication beyond this distance requires the use of a RS-485 Network
Extender.
Securing a network prevents the removal, substitution or addition of modules to the module
network ensuring system integrity.
Features
• Secure Encrypted RS-485 Module Communications
• Onboard Ethernet 10/100M Interface
• 16 On Board Zone Inputs
• 2 Bell/Siren PGM Outputs
• 1.8A Switching Power Supply
• Intelligent Battery Charge Algorithm and Monitoring
• Upload Download for programming and control of local and remote sites
• Online and Remote upgradeable firmware
• 2400Bps Modem Communication
• All Major Alarm Reporting Formats
Controller Specifications
The following specifications are important and vital to the correct operation of the
PRT-CTRL Protégé System Controller. Failure to adhere to the specifications will
result in any warranty or guarantee that was provided becoming null and void.
Integrated Control Technology continually strives to increase the performance of its products
and as a result the specifications may change without notice. It is recommended that you
always consult www.integratedcontroltechnology.com for the latest documentation and
product information.
Power Supply
AC Input Voltage 16VAC 50/60Hz @ 40VA (Max)
Operating Current 280mA (Typical)
DC Output (Auxiliary) 1.2A (Max)
Battery Charging 350mA/700mA
Battery Low 10.5VDC
Battery Restore 11.5VDC
Communication
Ethernet 10/100 Auto Negotiation
RS-485 Isolated Module Network
Modem Security Reporting
Upload Download 2400Bps
Dial Up Networking
Outputs
Bell Outputs 2 (PGM Outputs)
1.8A (Max), 2A Electronic Shutdown
Load 2 8 Ohm 20W Siren
Low Current PGM Outputs 2 50mA (Max) Open Collector
Status Output 50mA (Max) Open Collector
Inputs
Zone 16 (500ms to 40sec Input Speed)
Tamper 1 (Normally Closed)
Trouble Zone 64