9.2 Address Selection (Menu 1)
The Address Selection sets the address of the Protégé® EliteSuite® Eclipse LED Keypad, this address
must be a unique address on the system from 1 to 250.
To View the Current Address
Step 1
To view the current address enter the following key press sequence:
, 1,
The address will be displayed as a sequence of three Number LED’s lighting one after the other
corresponding to each of the three digits of the address.
To Change the Current Address
Step 1
To change the current address enter following key press sequence:
, 1, [ADDRESS 1], [ADDRESS 2], [ADDRESS 3],
The device will beep four times to indicate that it has changed the address.
!
All three digits must be entered when programming an address. This means that
for addresses below 100, you must enter [0] then the 2 digits of the address.
For addresses below 10, you must enter [0], [0] followed by the address digit.
9.3 Device Options (Menu 2)
The Device Options set options that relate to the mode of operation of the Protégé® EliteSuite®
Eclipse LED Keypad.
Step 1
To enter the Device Options menu enter the following key press sequence:
, 2
The currently assigned Device Options will be displayed using the Number LED’s.
Step 2
To toggle options press the keys 1 to 8 and the corresponding key LED will be lit when that option
is
ENABLED
.
17
