Step 1
To gain access to the Device Configuration menu, apply power to the device.
Step 2
Within the first two seconds after the four beep tone is heard, press the
CLEAR
key ( ), followed
by the
ENTER
key ( ). Note: If any key is held down while the device is powered up it
will not be registered.
The
ARM
LED will then begin flashing to notify that Device Configuration mode has been entered.
You can then press the key corresponding to the menu required
(as detailed in the following
sections).
9.0 Device Configuration
9.1 Entering Device Configuration Mode
Before the Protégé® EliteSuite® Eclipse LED Keypad module will communicate it must be assigned
an address and programmed with specific options as to how it will operate. This is achieved by
accessing the Device Configuration menu.
!
The Device Configuration menu can only be accessed in the first two seconds when
the device powers up. It is not able to be accessed when the system is operational.
16
