background image

16

This Limited Warranty does NOT cover:

1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse,
theft or attempted theft, vandalism, improper installation, lack of reasonable care, unauthorized repair or service,
or if the model or serial number has been altered, tampered with, defaced or removed.
2. Loss or damage caused by the use of unauthorized cleaning products or methods that damage or destroy the
product.
3. Initial installation or the removal and re-installation of the product.
4. Cosmetic damage, an act of God, or natural disaster.
5. Products modified or used for any purposes other than for those which the product is specifically designed.
6. Damage that occurs in shipment (the third party shipping service is responsible for any shipping damages).

The company reserves the right to remedy any minor defects in defective units by replacing defective, 

inoperable or missing parts rather than offering a refund or exchange.

Protective Enclosures Company, LLC, or any subsidiaries, shall not be liable, under any circumstances, for 

incidental, indirect, special, and consequential or multiple damages as a result of the sale or use of this The Display 

Shield® product. Some states and countries do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitations or exclusions may not apply to you.

THE EXTENT OF PROTECTIVE ENCLOSURES COMPANY, LLC’S LIABILITY UNDER THIS WARRANTY IS LIMITED AS 

PROVIDED ABOVE AND, IN NO EVENT, SHALL THE LIABILITY OF PROTECTIVE ENCLOSURES COMPANY, LLC EXCEED 

THE PURCHASE PRICE PAID BY THE ORIGINAL RETAIL PURCHASER FOR THE PRODUCT.

Any questions regarding this warranty should be addressed to:

Protective Enclosures Company, LLC

The TV Shield | The Display Shield

ATTN: WARRANTY DEPARTMENT

385 Centerpointe Circle

Suite 1319

Altamonte Springs, FL 32701

USA

800-331-2628 Toll Free

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES OR LIABILITIES. ANY IMPLIED WARRANTIES, 

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS 

WRITTEN WARRANTY. IN NO EVENT SHALL PROTECTIVE ENCLOSURES COMPNAY, LLC, OR ANY SUBSIDIARY, OWNER, 

OR PARTNER BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER 

WARRANTY EXPRESS OR IMPLIED WHATSOEVER.

No person or representative is authorized to assume for Protective Enclosures Company, LLC any liability other 

than expressed herein in connection with the sale of this product. Some jurisdictions do not allow limitations on 

how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the 

above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also 

have other rights, which vary from jurisdiction to jurisdiction.

Summary of Contents for The TV Shield





















Reviews: