11
STEP 10
STEP 9
1. Remove the protective covering from both sides of the lens, as shown in the diagram.
1. Replace the cover and torx screws, as shown in the image.
Note: As a precaution, wash your hands and have a clean work area before you remove the protective covering. This will
avoid any possible scratching of the lens that may occur during the wall mounting procedure. Also, it is advised to wipe
clean the inside of the shield before securing.
Peel here
10-32 X 1-1/4” SCREW TORX - FH-PIN-IN
(12 pieces)
10-32 X 1-1/4” SCREW TORX - FH-PIN-IN
(12 pieces)
HORIZONTAL DISPLAY SHIELD
VERTICAL DISPLAY SHIELD
Install the black torx security screw caps by pressing on
to the head of screw.
2
.
Security Screw cap (12 pieces)
Security Screw cap (12 pieces)
