6
Figure 8 - SRL Installation and Fastener Torque Requirements
Secure SRL in Swivel Bracket with
5/8” Bolt through bracket holes
and SRL Anchor Point.
Self Retracting Lifeline (SRL)
Swivel Bracket
3.4 USE:
Connect the Self Retracting Lifeline to the full body harness according to the self retracting lifeline and
the full body harness user instruction manuals. Re torque clamp plate and seam clamp fasteners daily (see
Figure 8).
WARNING:
Read and follow the user instruction manuals included with the self retracting lifeline and the full
body harness.
4.0 TRAINING
4.1
It is the responsibility of all users of this equipment to understand these instructions, and to be trained
in the correct installation, use, and maintenance of this equipment. These individuals must be aware of the
consequences of improper installation or use of this equipment. This user manual is not a substitute for a
comprehensive training program. Training must be provided on a periodic basis to ensure pro
fi
ciency of the users.
WARNING:
Training must be conducted without exposing the trainee to a fall hazard. Training should be
repeated on a periodic basis.
5.0 INSPECTION
5.1 FREQUENCY:
BEFORE EACH USE:
inspect the Standing Seam Roof Anchor according to sections 5.2 and 5.3.
FORMAL
INSPECTION:
A formal inspection of the Standing Seam Roof Anchor must be performed at least
annually by a competent person other than the user. The frequency of formal inspections should be based
on conditions of use or exposure. See sections 5.2 and 5.3. Record the inspection results in the inspection
and maintenance log in section 9.0.
WARNING:
If this equipment has been subjected to fall arrest forces remove from service and destroy, or return
to an authorized service center for repair.
