CRW 200 Service Manual
8/13
4.4.3
Unscrew the M28 nut
(9)
.
4.4.4
Dismantle all the parts:
•
M28 Nut
(9)
;
•
Spring washer
(10)
;
•
Pressure plate
(11)
;
•
Friction ring – 1
st
(12)
;
•
Gear (13);
•
Friction ring – 2
nd
(14)
;
•
Support plate
(15)
;
•
Bush
(16)
.
Check carefully all the parts against
any damages and/ or corrosion.
Metal parts may be cleaned with the
aid of extraction naphtha or similar
solvent. Replace, if appropriate.
Don’t clean or repair the friction
ring. If the ring is worn down or
damaged, it should be replaced with
new one.
Assembly the components of the set in
reverse order.
(The M28 nut thread
must be greased before screwing)
4.4.5
•
Set up a torque spanner with
the torque value of 60 Nm.
•
Tight the M28 nut
(9)
with the
specified torque.
4.4.6
•
Attach the dog's springs
(17)
to the pins
(18)
.
•
Mount the dogs
(19)
onto
dog's axles
(20)
•
Secure the dogs with the aid
of Φ8 locking ring
(21)
.
Use a
new locking ring.
60 Nm
grease before
screwing
9
9
20
19
17
18
21
13
12
11
10
9
14
15
16
