Proteco Q80S, Instruction Manual

Page: 27 / 29

Q80S_2014
26
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
ANNEX 1
-
Table for PROGRAMMING
= DEFAUL Settings
RADIO MenU
SAVING a new remote control – START command
SAVING a new remote control – PEDESTRIAN START command
SAVING a new remote control – 2° RADIO CHANNEL
With optional AUX module only
DELETING an existing remote control code
DELETING ALL stored remote controls
PROGRAMMING Menu
AUTOMATIC Programming Procedure with OBSTACLE DETECTION
SEQUENTIAL Programming Procedure
Reset to Default Settings for RAM openers
OPENING DIRECTION of the motor
LIMIT SWITCHES mode selection
FORCE Menu
TORQUE/POWER adjustment
OBSTACLE DETECTION level adjustment
SPECIAL FUNCTIONS Menu
MULTI-OCCUPATION Function
PRE-BLINKING Function
DECELERATION Fuction
PHOTOCELLS TEST Function
START PULSE Function
QUICK CLOSING Function
SEPARATE PUSH-BUTTONS Function
MOTORS TEST Function
FLASHING LIGHT mode
DEAD MAN’S SWITCH mode
(max)
= memory is full
(max)
= memory is full
(max)
= memory is full
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= flashing
= FIX (LED)
= STANDARD mode
= DEAD MAN’S SWITCH mode
= RIGHT
= LEFT
= ELECTROMECHANICAL
= MAGNETIC