DMX Settings
Each unit occupies 1 Channel . To ensure that the control signals are properly directed to each
unit, they require addressing. This is to be set for every single unit by changing the Dip Switches
as set out in the table below.
The starting address is de? ned as the ? rst channel from which the unit will respond to the
controller.
Please make sure that you do not have any overlapping channels in order to control each unit
correctly and independently from any other ? xture on the DMX data link. If two, three or more units
are addressed similarly, they will work similarly.
Dip-Switches Settings
Setting the DMX
starting address:
Device number
& channels:
DIP-switch No.
DMX starting
address.
1 2 3 4 5 6 7 8 9
1
2
4
8
16
32 64 128 256
Unit 1 - channel 1
Unit 2 - channel 2
Unit 3 - channel 3
Unit 4 - channel 4
Unit 5 - channel 5
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
V
-Fog
www.ProTech-Lighting.com
English
