Appendix B Technical Summary
SP-6150/6155 SERIES USER MANUAL
Page: B-26
AFUEFIx64 command for system BIOS update
AFUEFIx64.efi is the AMI firmware update utility; the command line is
shown as below:
AFUEFIx64 <ROM File Name> [option1] [option2]….
Users can type “AFUEFIx64 /?” to see all the definition of each control
options. The recommended options for BIOS ROM update include
following parameters:
/P
:
Program main BIOS image.
/B
: Program Boot Block.
/N
: Program NVRAM.
/X
: Don’t check ROM ID.
II. BIOS Update Procedure
1
Use the bootable USB storage to boot up the system into the DOS
command prompt.
Shell> fs0:
fs0:\> cd afuefix64
2
Type "
AFUEFIx64 615Xxxxx.bin /p /b /n /x”
and press
Enter
to start the flash procedure.
(Note that xxxx means the BIOS revision part, e.g. 0PD1…)
3
During the BIOS update procedure, you will see the BIOS update
process status and its execution percentage. Beware! Do not turn
off the system power or reset your computer when the entire
update procedure are not complete; otherwise, the BIOS ROM
may be crashed and the system will be unable to boot up next
time.
4
After the BIOS update procedure is completed, the following
messages will be shown: