protech MH-5100, User Manual

Page: 24 / 133

Chapter 2 Getting Started
MH-5100 SERIES USER MANUAL Page: 2-12
Low Battery Indicator
The low battery indicator will show on the LCD screen when the battery is
nearly exhausted. When the low battery indicator appears on the tool tray, you
should recharge the battery by connecting the power adapter of Pad/Lite
Cradle or replace a fully charged battery immediately.
2.4.4 Recharging Battery from Pad
Before you use MH-5100 Pad, follow the instructions below to charge the
battery:
Step 1. Connect the Pad
’s AC power adapter to the DC-IN jack located on
the right side of the Pad. (Refer to the Side View section of Pad for
the location of the DC-IN Jack.)
Step 2. Plug the other end to an AC power outlet.
MH-5100 Pad battery will then start charging, and the Power LED indicator on
the top left corner of the touch screen will then flash GREEN. After the battery
is fully charged, the Power LED indicator will turn to a solid green.
2.4.5 Recharging Battery from Lite Cradle
Step 1.
Connect the Lite Cradle’s AC power adapter to the DC-IN power jack
located on the bottom of the Lite Cradle.
Step 2. Plug the other end to an AC power outlet.
The Power LED indicator on the top left corner of the touch screen will then
flash GREEN. After the battery is fully charged, the Power LED indicator will
turn to a solid green.