protech MH-5100, User Manual

Page: 22 / 133

Chapter 2 Getting Started
MH-5100 SERIES USER MANUAL Page: 2-10
2.4.2 Turning the Power On and Connect to Local Network from
Lite Cradle
Prerequisite: Insert a ball point pen or a pin into the hole of DWR/LAN
selection switch slot located on the bottom base of the Lite Cradle, and switch
it to the LAN port location. See the picture below:
Press the Power Button on the right side of the Pad to turn on the system.
Connect the Ethernet cable to the LAN port on the rear side of the Lite Cradle
and the other end of the network cable to a port on your hub, switch or router.
(Refer to the Side View section of Pad for the location of Power Button .)
Refer to the I/O Ports Diagram section of Lite Cradle for the location of LAN
port.
LAN and Cash Drawer Selection
DWR LAN