93-520-20 Issue 3.3
Page 34 of 60
CirrusPro Engineer’s Manual
3.4.2 Network and language settings display software V 1.12
This version of display software introduces foreign language versions and alters the access to the
network setting menu.
On powering up, the display shows the display
software version number for a short time, then the
Logo Menu. The unit searches the network for
detectors and displays the number found. If, during
operation, a detector is disconnected this indicated
as shown.
To enter the network setting menu press “Setup”.
This will then show the security access screen as
shown. Enter the sequence, 112020 using the
buttons.
Use the + and – to select the number and press
enter. When all the digits have been entered press
“Accept”.
The language option can be altered by scrolling
through the language options using + and – keys
and then “Sel” key to move to the next option.
The network options should now be set as
described in the previous section 3.4.1. When
complete press “Exit”, to enter next menu as
described in the previous section.
