Protean Instrument Corporation
81
Data
MPC
900
Once data export begins the serial number directory is checked to verify that the
selected data for export does not overwrite previous data. As displayed on the screen
below, a warning message showing the Alpha Control Check data already exists on the
USB flash drive. If you wish to overwrite the data press
OVERWRITE
and the Alpha
Control Check data that was on the USB flash drive is overwritten. If you wish to keep
the Alpha Control Check data press
EXIT,
and remove the USB flash drive and copy the
data to another source or insert a new USB flash drive. It is recommended to delete
any previous exported data under the serial number directory on the USB flash drive
before exporting new data so that you avoid the data overwrite warning.
When the data export is successfully completed, “Finished! “ will be displayed, as seen
on the screen below.
