ProSun Luxura X10/Vegaz 52, User Manual

Page: 30 / 100

30
MARK76X1001 Rev 6
Guidance and Manufacturer’s Declaration - Electromagnetic Immunity
The Luxura Vegaz model 52X is intended for use in the electromagnetic environment specified below.
The customer or the user of the Vegaz model 52X should assure that it is used in such an environment.
Immunity Test IEC 60601 Test Level Compliance Test Electromagnetic
Environment - Guidance
Electrostatic discharge
(ESD) IEC 61000-4-2
±2 kV, ±4 kV & ± 8 kV for
Contact Discharge
±2 kV, ±4 kV, ±8 kV and±
15kV for Air Discharge
±2 kV, ±4 kV & ± 8 kV for
Contact Discharge
±2 kV, ±4 kV, ±8 kV and±
15kV for Air Discharge
Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should be
at least 30%.
Electrical fast transient/
burst IEC 61000-4-4
±2kV for power supply lines
±1kV for input/output lines
±2kV for power supply lines
±1kV for input/output lines
Mains power quality
should be that of a typical
commercial or hospital
environment.
Surge IEC 61000-4-5 AC Mains Line to Ground
±0.5kV, ±1kV and ±2kV
AC Mains Line to Line
±0.5kV and ±1kV
AC Mains Line to Ground
±0.5kV, ±1kV and ±2kV
AC Mains Line to Line
±0.5kV and ±1kV
Mains power quality
should be that of a typical
commercial or hospital
environment.
NOTE:
1. UT is the a.c mains voltage prior to application of the test level.
2. Power frequency magnetic field test as described in EN61000-4-8 are not applicable. The
appliance doesn’t contain components which are sensitive to magnetic fields (e.g. Hall sensors)
3. Voltage Dips and Interruptions (IEC 61000-4-11) are not applicable because the rated input is
more than 16A per phase.