52 MARK68AF1001 Rev 2
Tools/Items Necessary:
d
Water
40
Gallons
Distilled
Water
# 2 Phillips
3mm allen
wrench
1
2
Once the unit is in place, remove the fill
cap then that is located at the head end
of the unit.Then use the funnel to fill the
unit with distilled water.
After fill tube is attached, fill unit with
40 gallons of distilled water.
Note: warranty is VOID if distilled
water is not used.
*Important*
After filling air can be trapped in the
plumbing causing irregular jet opera-
tion. See troubleshooting guide (pg.
15) for instructions on removing the
Note: The unit will take 38-40 gallons. You will note that the
unit is full when you are able to see the water inside the fill
tube and you can proceed to closing the cap.
Installation