46 MARK68AF1001 Rev 2
Net Tightening
Net Tightening
1. Remove plates holding net in place
then flip over so the urethane is facing
down.
2. Tighten bolts evenly surrounding the
net to regain tension.
Draining the Unit
Drain Pump Instructions (Optional)
1. Remove end skirt on the head side
of the bed and locate the small drain
pump. Attach a garden hose to the out
stem on the pump.
2. Place end of garden hose into the
desired draining location.
3. Open valve and turn on pump and let
run until tub is empty.
(Approximately 10-15 minutes)
Note - If you do not have a drain pump,
attach a hose or place bucket under-
neath the valve and let water come out.
To drain
To valve
Drain Valve