Prima IP User Manual Rev 1.5 2007
- -
73
4.22
Alarms/Selections – Select the Alarm-triggering
Events
Prima IP is capable of sending immediate alerts, as emails or SNMP traps, and/or performing automatically a
power cycling when there is blue screen, no video, or NumLock test failure from a remote computer. This
feature should be used in conjunction with the
autoscanning
function, so that Prima IP will help carry on a
constant surveillance on the health conditions of your connected servers.
Note:
This
Alarm Selection
page is where you can select which action
Prima IP
must do when it
detects an event. This page is NOT the place where you can specify how the action is to be
implemented. To do so, refer to SNMP Traps, Email Alarms and Computers.
After you have made all modifications, click
Store Settings
to save your settings and then hit
Apply
Settings/Restart Servers
to validate these new settings.
No change you have made on this page will apply until you hit
Apply Settings/Restart
Servers!
Prima IP can respond to three types of alarm-triggering events:
•
No Video
•
Blue Screen
•
NumLock test failure.
Each one of these events can be configured to trigger any one of these three types of actions:
•
Send an email,
•
Send an SNMP trap message,
•
Restart the computer (Power cycling).
