13
Insert the power cord plug into an electrical outlet.
Turn the power switch to the “I” position for idle mode.
Three functions are available in idle mode: ON/OFF, Recline, Restore.
1. ON/OFF
Press this button to automatically recline the backrest and to automatically elevate
the footrest to a specified position. When the chair has stopped moving, any
massage function button may be pressed.
Press the ON/OFF button again to stop all massage functions and to return the
massage rollers to their original position.
Note: The angle of the backrest and the footrest may be adjusted by press or to the
desired position.
2/3. Recline/Restore
Angle Adjustment Control Button For Backrest and Footrest
Press this button once to adjust the backrest and the footrest to comfortable
position.
Press the button again to confirm the position.
4/5/6. Auto Program
The three pre-programmed massage sessions are activated by pressing the
buttons: RELAX,THERAPY,AIR.
Manual Back Massage Programming
7. Kneading
Kneading Function Start/Stop Control Button-3 levels of intensity.
Press this button once to activate the kneading function for a full back massage at
medium intensity.
Press the button again to stop the kneading massage function.
Press the INTENSITY button to adjust the kneading intensity while the kneading
function is activated.
8. Tapping
Tapping Function Start/Stop Control Button – 3 sizes of width & 3 levels of intensity
