5
System Connections
• Do not connect the receiver to the wall AC outlet when plugging and unplugging connection cords.
• Be sure to connect the white RCA pin cords to the L(left) and the red RCA pin cords to the R(right) jacks when making
connections.
• Change the position of the FM indoor antenna until you get the best reception of your favorite FM stations.
• A 75
Ω
outdoor FM antenna may be used to further improve the reception.
Disconnect the indoor antenna before replacing it with the outdoor one.
• Place the AM loop antenna as far as possible from the receiver, TV set, speaker cords and the AC input cord and set it to a
direction for the best reception.
• If the reception is poor with the AM loop antenna, an AM outdoor antenna can be used in place of the AM loop antenna.
• Make connections firmly and correctly. If not, poor connections can cause loss of sound, noise or damage to the receiver.
• If the electricity fails or the AC input cord is left unplugged for about two weeks, the memorized contents will be cleared.
Should this happen, memorize them again.
COMPONENT
Y
MONITOR
VIDEO 2
VIDEO 3
S-VIDEO
VIDEO 1
OUT
IN
VIDEO 1
VIDEO 2
MONITOR
VIDEO 1
VIDEO 2
VIDEO 3
MONITOR
VIDEO 1
VIDEO
OUT
IN
ROOM 2
VIDEO 1
OPT 1
OPT 2
COAX1
COAX2
COAXIAL
IN
7.1CH
DIRECT
INPUT
FRONT
CENTER
SUR-
ROUND
SUR-
ROUND
BACK
FRONT
CENTER
SUR-
ROUND
SUB
WOOFER
SUR-
ROUND
BACK
PRE
OUT
SUB
WOOFER
R
L
R
L
AM
LOOP
OUT
TAPE
MON.
VIDEO 1
R
L
ROOM 2
MULTI
VIDEO 3
CD
AUX
VIDEO 1
VIDEO 2
TAPE
MON.
R
L
IN
L
FRONT
SPEAKERS
SURR.
SPEAKERS
SURR.
BACK
SPEAKERS
R
L
R
SWITCHED
230V~50Hz
100W MAX
OPTICAL IN
OPTICAL
OUT
REC
CAUTION :
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE. REFER-SERVICING TO QUALIFIED
SERVICE PERSONNEL.
SER. NO
AC OUTLET
FM
75
CENTER
SPEAKER
FRONT , CENTER , SURROUND,
SURROUND BACK : 6 OHMS( ) MIN.
AC INLET
230V~50Hz
370W
Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro Logic”,
and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license from Digital Theater System, Inc. U.S. Pat. No's.
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other U.S. and world-wide patents
issued and pending. "DTS" and " DTS-ES" and "Neo:6" are trademarks of
Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc.
All Rights Reserved.
Y
P
B/
C
B
P
R/
C
R
Y
P
B/
C
B
P
R/
C
R
P
B/
C
B
P
R/
C
R
MODEL NO. RV4700 DTS-ES
AUDIO/ VIDEO RECEIVER
DESIGNED IN USA
ASSEMBLED IN KOREA
CONNECTING ANTENNAS
FM
CONNECTING AUDIO COMPONENTS
FM
(INDOOR ANTENNA)
(OUTDOOR ANTENNA)
SUPPLIED ADAPTOR
300 ohm
feeder
•
Use these jacks to connect the corresponding analog outputs of a DVD player or external decoder, etc. that has 5.1 or 7.1
channel outputs.
•
In case of 5.1 channel outputs, do not connect these SURROUND BACK inputs to your audio component. ( For details, refer
to the operating instructions of the component to be connected.)
•
The AUX jacks may be connected to an additional audio component
such as CD player or tape deck, etc.
•
Connect the TAPE MONITOR IN/OUT jacks to the PLAY(LINE OUT)
/REC(LINE IN) jacks of tape deck, MD recorder or CD recorder.
•
The TAPE MONITOR IN/OUT jacks may also be connected to the
LINE OUT/IN jacks of an optional graphic equalizer.
PLAY(LINE OUT)
REC(LINE IN)
SURROUND CH OUT
SURROUND BACK CH OUT
SUBWOOFER CH OUT
CENTER CH OUT
FRONT CH OUT
CD player
CONNECTING 7.1CH DIRECT INPUTs
Additional
audio component
Tape deck or
MD recorder
Decoder with 5.1
or 7.1 channel output
TAPE
MON.
CD
AUX
TAPE
MON.
IN
REC
7.1CH
DIRECT
INPUT
FRONT
CENTER
SUR-
ROUND
SUB
WOOFER
SUR-
ROUND
BACK
R
L
AM
LOOP
FM
75
AM loop antenna
