Proson RV4700 -ES Operating Instructions Manual Download

Page: 16 / 50

Operate the selected component for
playback.

Select the tone mode as desired.

Select the digital or the analog input
connected as desired.

At the tone defeat mode, each time the MULTI
CONTROL knob is rotated, the tone defeat mode
changes as follows:

DEFEAT ON : When listening to a program source

↕

without the tone effect.

DEFEAT OFF : When adjusting the tone for your taste.

At the desired tone (bass or treble), each time the
MULTI CONTROL knob is rotated, the tone level
can be adjusted within the range of +10~ -10 dB.

• In general, we recommend the bass and treble to be

adjusted to 0(flat) level.

• To complete tone adjustment, repeat the above steps

⑦

and

⑧

• Extreme settings at high volume may damage your

speakers.

• Each time this button is pressed, the tone mode

changes as follows:

BASS

TREBLE

DEFEAT OFF(or ON)

• The tone display is shown for 5 seconds.
• If the tone display disappears, press the TONE

MODE button again.

• ( ) : When the tone defeat function is activated

(“DEFEAT ON”), bass and treble modes cannot be
selected

Note:

• When the source direct function is activated, the

tone mode cannot be selected.

• When playing back the program sources with

surround sound, refer to “ENJOYING SURROUND
SOUND” on page 21.

Adjust the (overall) volume.

At the desired tone mode, adjust as
desired.

When CD, TAPE MON or VIDEO 1~ VIDEO 4
is selected

Adjusting the tone (bass and treble)

• Each time this button is pressed, the corresponding

input is selected as follows:

DIGITAL

ANALOG

• To listen to DTS, Dolby Digital or MPEG program

sources in the 2-CH downmix mode, in the stereo
mode, the digital input should be selected. (For
details, refer to “Downmixing into 2 front channels”
on page 24.)

• When TUNER or AUX is selected as an input source,

the analog input is automatically selected.

Notes:

• When the selected digital input is not connected.

“DIGITAL” is flickering, meaning no sound. (Refer
to “ENJOYING SURROUND SOUND” on page 21.)

• To select the digital input, you should match the

connected DIGITAL IN to the corresponding input
source.

(For details, refer to “When selecting the DIGITAL
IN SETUP” on page 39.)

DIGITAL/ANALOG

TONE MODE

MULTI CONTROL

DVD

VOL.

CH LEVEL

OSD

CH SEL

DSP

MODE

AUTO

CENTER

MODE

TEST

TONE

DISC

P.SCAN

TUNER

T1/MON

AUX

PHONO

VID1

VID2

VID3

VID4

VID5

SYS DISP

SLEEP

DIRECT IN

ROOM2

INTRO

RETURN

RPT

7.1 SURR

TITLE

ENTER

HOME THEATER MASTER

RV4700 DTS-ES

MASTER VOLUME

DOWN

VOL.

Summary of Contents for RV4700 -ES



















































Search results

Summary of Contents for RV4700 -ES

Reviews:

Related manuals for RV4700 -ES

Brands by name

Popular brands

Proson RV4700 -ES, Operating Instructions Manual

Search results

Summary of Contents for RV4700 -ES

Reviews:

Related manuals for RV4700 -ES

Brands by name

Popular brands