MVI46-S3964R
♦
SLC Platform
Diagnostics and Troubleshooting
Siemens 3964R Protocol
Page 36 of 74
ProSoft Technology, Inc.
Use this command to view communication status and statistics for the selected
port. This information can be useful for trouble-shooting communication
problems.
Transferring the Configuration File from MVI46 module to PC
Press
[S]
to receive (download) the configuration file from the module to your
PC.
Press
[Y]
to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
After the file has been successfully downloaded, you can open and edit the file to
change the module's configuration.
Transferring the Configuration File from PC to MVI46 module
Press
[R]
to send (upload) the configuration file from your PC to the module and
store the file on the module's Compact Flash Disk.
Press
[Y]
to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
After the file has been successfully downloaded, the module will restart the
program and load the new configuration information. Review the new
configuration using menu commands
[0]
and
[1]
to verify that the module is
configured correctly.
Warm Booting the Module
Caution: Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the module to stop communicating with the
processor or with other devices, resulting in potential data loss or other failures. Only use these
commands if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be
careful when pressing keys so that you do not accidentally execute an unwanted command.
Press
[W]
from the Main Menu to warm boot (restart) the module. This command
will cause the program to exit and reload, refreshing configuration parameters
that must be set on program initialization. Only use this command if you must
force the module to re-boot.
Exiting the Program
Caution: Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the module to stop communicating with the
processor or with other devices, resulting in potential data loss or other failures. Only use these
commands if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be
careful when pressing keys so that you do not accidentally execute an unwanted command.
April 17, 2008
