Diagnostics & Troubleshooting
MVI94-GSC-E
♦
FLEX Platform
User Manual
Generic ASCII Comunication Module
ProSoft Technology, Inc.
Page 31 of 60
July 6, 2009
Character Definition
[ ]
Data enclosed in these characters represent data received on the port.
< >
Data enclosed in these characters represent data transmitted on the port.
<R+>
These characters are inserted when the RTS line is driven high on the port.
<R->
These characters are inserted when the RTS line is dropped low on the port.
<CS>
These characters are displayed when the CTS line is recognized high.
_TT_
These characters are displayed when the timing mark interval has been reached.
This parameter is user defined.
Stopping the Data Analyzer
Press
[S]
to stop the data analyzer. Use this option to freeze the display so the
data can be analyzed. To restart the analyzer, press
[B].
Important:
When in analyzer mode, program execution will slow down. Only use this tool during a
troubleshooting session. Before disconnecting from the Config/Debug port, please press
[S]
to stop
the data analyzer, and then press
[M]
to return to the main menu. This action will allow the module
to resume its normal high speed operating mode.
Returning to the Main Menu
Press
[M]
to return to the Main Menu.
Data Analyzer Tips
From the main menu, press
[A]
for the "Data Analyzer". You should see the
following text appear on the screen:
After the "Data Analyzer" mode has been selected, press
[?]
to view the Data
Analyzer menu. You will see the following menu:
