RLXIB-IHN
♦
802.11n
Before You Begin
Industrial Hotspot
Setup Guide
Page 12 of 27
ProSoft Technology, Inc.
March 30, 2010
1.3
Plug In the Cables
You can configure the RLXIB-IHN using the Ethernet port on the radio. On the
underside are three ports; Ethernet, Serial and Power (10 to 24 VDC 6 W).
From left to right: Power connector, Serial port and Ethernet port.
Use the Ethernet cable to configure the radio for the first time.
Note:
After you plug in the power cable and Ethernet cable, the radio performs a startup procedure
that includes a self-test, loading the main program, and initializing the radio. The front panel LEDs
will illuminate after approximately two seconds. The entire startup procedure can take up to 90
seconds.
After the startup procedure has completed successfully, the Power LED should
be green, meaning that the radio has power. The Ethernet LED should also be
green, meaning that the Ethernet connection is working. The RF Transmit and
RF Receive LEDs should blink.
For information on making connections, see Radio Power Requirements and
Cable Specifications in the RLXIB-IHN User Manual.
