RLXIB-ICN ♦ 802.11n
RadioLinx Configuration Manager
Industrial Client
User Manual
ProSoft Technology, Inc.
Page 53 of 129
July 25, 2013
Parameter
Description
Hysteresis
Enter a value from 1 to 10 dBm (default 3 dBm) to adjust the preference
given to the current parent to prevent inadvertent switching between
parent radios.
Click
Apply
to save your changes.
Click
Clear
to discard your changes.
Available Parents List
This page displays the list of available parents for this RLXIB-ICN radio.
Select (check) the
F
ILTER BY MY
SSID
checkbox and click
A
PPLY
to restrict the list
of available parents to those with the same SSID as the radio you are
configuring.
Both the selected parent and all other potential detected parents will be listed. A
green dot in the leftmost column indicates the selected parent.
Available Parents List (by radio)
Parameter
Description
MAC ID
A unique hexadecimal number that identifies any Ethernet device.
SSID
Network Name (Service Set Identifier).
RSSI
The received signal strength indicator (in dBm), or signal strength,
between this radio and the parent.
Channel
The radio channel on which the device is transmitting.
Security
The encryption type enabled for the device.
Speed (Data Rate)
This is the maximum possible data rate (in Mbps) of the parent link.
Hops
The number of hops to allow between this radio and the Master (1 to
10). A value of 1 indicates that the radio is directly connected to the
Master.
Weight
This is the calculated cost (or weight) given to this parent based on the
automatic parent selection rules. A lower cost is a better parent
candidate.
Age (sec)
The length of time (in seconds) since the radio last saw a packet from
this MAC address