ProSoft Technology PLX51-DF1-MSG, User Manual

Page: 13 / 69

Installation
Page 13 of 69
2.2. MODULE MOUNTING
The module provides a DIN rail clip to mount onto a 35mm DIN rail.
Figure 2.3 - DIN rail specification
The DIN rail clip is mounted on the bottom of the module, toward the back. Use a flat screw
driver to pull the clip downward. This will enable you to mount the module onto the DIN rail.
Once the module is mounted onto the DIN rail, the clip must be pushed upward to lock the
module onto the DIN rail.
Figure 2.4 - DIN rail mouting