EIP Protocol
PLX30 Series
User Manual
Ethernet and Serial Gateways
Page 78 of 200
ProSoft Technology, Inc.
September 19, 2012
The
TARGET DEVICE DATA TABLE ADDRESS
must be set to a valid file
element (such as, N11:0) for SLC and PLC5 messages. The
MULTIHOP
option
must be set to
YES.
The
MULTIHOP
tab portion of the dialog box must be
completed as displayed in the following window:
Set the IP address value to the gateway’s Ethernet IP address. The "Insert" key
must be pressed to add the second line for ControlLogix Backplane and set the
slot number to zero.
SLC5/05 Read Commands
Read commands transfer data to the SLC processor from the gateway. An
example rung used to execute a read command is shown in the following
diagram:
