MVI56-DH485R
♦
ControlLogix Platform
Module Configuration
DH485 Interface Module for Remote Chassis
User Manual
Page 24 of 97
ProSoft Technology, Inc.
August 27, 2009
2.2 [Module]
This section provides the module with a unique name, identifies the method of
failure for the communications for the module if the PLC is not in run, and
describes how to initialize the module upon startup.
The following example shows a sample [Module] section:
Modify each of the parameters based on the needs of your application.
2.2.1 Module Name
0 to 80 characters
This parameter assigns a name to the module that can be viewed using the
configuration/debug port. Use this parameter to identify the module and the
configuration file.
2.2.2 Error / Status Pointer
-1 to 3999
Starting register location in virtual database for the error/status table. If a value of
-1 is entered, the error/status data will not be placed in the database. All other
valid values determine the starting location of the data. This data area includes
the module version information.
