Page
56
AN-X-MOD (Master)
November 2011
Update AN-X Flash
The
Utilities/Update AN-X Flash
command updates the low-level
firmware (configuration and production kernels).
Files have extension qtf.
This command resets the AN-X. You will receive a warning and be
given the opportunity to Cancel the command.
If you cancel at the filename dialog, the AN-X has already been reset and
is in boot mode. Use the
Utilities/Restart AN-X
command to restart it in
production mode.
Update Firmware
There are two ways to update all the firmware in an AN-X module.
1.
The
Configuration/Firmware Update
command starts the firmware
update wizard, which takes you step by step through the firmware
update process.
2.
The
Utilities/Update Firmware
command updates all the firmware
on an AN-X you have selected using the
Utilities/Select An AN-X
command.
Firmware files have extension
bin
.
Firmware Update Wizard
Select the
Configuration/Firmware Update
command to start the
firmware update wizard.
