38
Visit Network High Speed Dome under different network environments
Users visit the Network High Speed Dome through LAN/ WAN. The following directions will tell you how to operate the Network
High Speed Dome through LAN/ WAN.
LAN
There two ways to connect Network High Speed Dome: Static IP/ Dynamic IP
Static IP
Static IP means the webmaster distribute a LAN inner IP address to the Network High Speed Dome. Keep your PC IP address
same as the camera IP address and to implement access.
Network topological graph as follows:
Network setting reference:
Setting procedure:
1. Log in Network High Speed Dome via the IE browser (the default IP is 192.168.1.188)
2. Switch to the page “ Network Setting” interface,fill the device IP address the network administrator distributed in the IP
address(eg.192.168.1.50)
3. Fill in subnet mask, the default is 255.255.255.0
4. Fill in gateway address, the default is 192.168.1.1
After input all parameters, click “Save”, then the device restart, Input the device IP address at the IE browser to visit the camera.
Dynamic IP
Dynamic IP means that Network High Speed Dome obtains IP address from DHCP server. See below picture for the network topology:
Summary of Contents for NC691B
Page 7: ...3 Connection instruction ...