ProScan NC691B, Operation Manual, Page: 35 / 47

31
Linkage Setting:

Alarm Output: Select the status of alarm output , Normal Open or Normal Close

Alarm Output Time: Set the length of time for alarm output

IO channel: Set the alarm linkage device input port

Preset ID: Click to enable linkage preset, and set the preset number

Snap/Record: Set the alarm output type, None/snap picture/record/snap record selectable

Email: Click to enable E mail alarm upload

IO out: Click to enable device alarm output port, and set the IO output number

Activate Level: Select the status of activating alarm , Normal Open or Normal Close

FTP upload: Click to enable FTP alarm upload
Time setting:

Add task: Add new alarm period

Del task: Delete the specified time period

Copy to: Copy the current alarm period to the other day
After setting, click to save it.
Motion
1) Motion Detect
Click Setting→ Alarm Conf→Motion→Motion Detect , IP Speed Dome “ Motion Detect ” interface, as shown in Figure 3-38:
Figure 3-38

Enable: Click to enable motion detection, there are max 4 motion detection

Sensitivity: Set the sensitivity, 1-10 levels adjustable

Clear all: Clear all motion detection setting
After setting, click to save it.