T-BAR GUTTERMOUNT INSTRUCTIONS
Page
2
of
2
2.
MOUNT CROSSBAR ONTO ROOF
Insert two M6x35 carriage bolts through each leg.
Fit clamps.
Place assembled bar on roof of the vehicle and
position legs in gutter ensuring that the crossbar is
positioned evenly across the vehicle, i.e. similar length
of crossbar protruding from each leg.
Tighten knobs. Tighten M8x20 CSK screws using Allen
Key provided.
Place rubber infill on the open crossbar Firmly push rubber infill into channel.
channel with one end pushed against
a leg and mark with a pen to cut at the
other.
