background image

1

2

Page 5 of 6

CYLINDER HOOK INSTRUCTION

INSTALL THE CYLINDER HOOKS:

• WITH CYLINDER HOOKS, YOUR LOAD IS LIMITED TO 2 BIKES ONLY!

• Do not use if strap will deform or damage trim or hatch.

• Do not open boot or hatch lid when Cylinder Hooks are installed.

• Do not allow strap to rub against sharp edges.

Remove the top

hooks from the

carrier.

Open the boot or hatch lid

and insert the buckle of the

Cylinder Hook between boot 

or hatch lid and car.

Keep the cylinders 

away from the edge.

IF THE BUCKLE 

WILL NOT FIT—

•  Remove 

cylinder pad 

and install 

strap.

•  Insert cylinder 

into strap loop.

•  Replace 

cylinder pad.

Before closing

the hatch…

The cylinders must be free 

from contact between hatch 

door and vehicle’s frame.

Close the hatch.

Pull firmly on the straps to

seat the cylinders.

WARNING

Never open your boot or hatch lid while strap carrier is 

installed. The Cylinder Hooks can slip causing the carrier 

to fall off the vehicle.

Always remove the carrier, leaving the Cylinder Hooks in place, 

reversing the installation process. Failure to remove the carrier 

may cause damage to boot or hatch lid.

While supporting 

the carrier with 

your body, attach 

the adapter 

straps to your 

carrier’s top 

straps.

Thread the top straps

through the Cylinder 

Hook buckle as shown.

Failure to correctly thread 

the strap can result in 

property damage, personal 

injury, or death.

RESUME STRAP MOUNT

INSTRUCTIONS PAGE 3, STEP 5.

LIMITED WARRANTY: Prorack Products (“Prorack”) will 

repair or replace merchandise which proves defective 

in materials and/or workmanship. The limited warranty 

is effective for three years from the date of purchase. 

The limited warranty is applicable only if the instructions 

are followed and the products are used properly. If a 

customer believes that a Prorack product is defective, the customer must return it to an authorised Prorack dealer 

with proof of purchase. Prorack will then issue authorisation to the dealer for the return of these products. If an 

article is found to be defective upon inspection by Prorack, Prorack will repair or replace the defective article at 

its discretion without charge. The customer will pay freight to Prorack, and Prorack will pay any applicable return 

freight. Unauthorised returns will not be accepted. Normal wear and tear of Prorack products or damage resulting 

from misuse, accidents, or alterations are not covered by this Limited Warranty. The purchaser acknowledges that 

Prorack has no control over the attachment of its products to vehicles or the attachment of items to the Prorack 

products. Accordingly, Prorack cannot assume responsibility for any damage to any property arising out of the 

improper attachment or use of its products. In addition, this Limited Warranty is not transferable and applies only to 

Prorack products and not to other products used in conjunction with Prorack products. This Limited Warranty is in 

lieu of all other warranties, expressed or implied, and does not cover consequential damages of any kind that may 

arise from the use or misuse of any Prorack product.

IF YOU NEED FURTHER

CUSTOMER SUPPORT:

Please contact your

dealer or call us at

1800 143 548 (AU) &

0800 4776 722 (NZ)

Monday – Friday,

8.30 am to 5:00 pm

Cylinder Hook 

adapters

THREE  Y

EAR

Reviews: