1034413B-1/19
Part #1034413 Rev.B
FRAME MOUNT
BIKE CARRIER
IMPORTANT WARNING
IT IS CRITICAL THAT ALL PRORACK RACKS AND ACCESSORIES BE PROPERLY AND SECURELY ATTACHED TO YOUR VEHICLE.
IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR
DEATH TO YOU OR TO OTHERS. YOU ARE RESPONSIBLE FOR SECURING THE RACKS AND ACCESSORIES TO YOUR CAR, CHECKING
THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR, AND DAMAGE.
THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS SUPPLIED WITH YOUR PRORACK
PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF
YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU
SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER SUCH AS A QUALIFIED GARAGE OR AUTO BODY SHOP.
SPRING (1)
THREADED
PLUG (1)
CLIP (1)
WHEEL
STRAP (2)
WHEEL TRAY
END CAP (2)
WHEEL
TRAY (1)
(BASE PLATE)
ROOF RACK BAR-SPREAD
REQUIREMENTS:
(DISTANCE BETWEEN TOWERS)
1 OR 2 BIKES......... 16” min. - 38” max.
3+ BIKES......... 18” min. - 38” max.
MORE THAN 2 BIKES ON ROUND OR SQUARE BARS ONLY:
WRENCH (1)
GREY KNOB (1)
GUIDE PLUG (1)
SHORT CARRIAGE
BOLT (1)
WASHER (1)
LOCK WASHER (1)
WING NUT (1)
SHORT WHEEL
TRAY BOLT (1)
LONG CARRIAGE
BOLT (2)
SHORT HEX BOLT
FOR SMALL BAIL (3)
LONG HEX BOLT FOR
LARGE BAIL (3)
BARREL SLEEVE (3)
SPACER (3)
BACKBONE (3)
NUT (3)
SET OF PADS (3)
SMALL BAIL (3),
MARKED “A”
LARGE BAIL (3),
MARKED “B”
THUMB-WHEEL (3)
ORIGINAL FACTORY
AND AERO BARS
UNIVERSAL ATTACHMENT HARDWARE
(HOOP ASSEMBLY)
ENGLISH
FRANÇAIS
ESPAÑOL
ORIGINAL FACTORY BAR WEIGHT LIMITS
2 bike = MAXIMUM LOAD
EACH BIKE = 30 lbs./14 kg
(DO NOT EXCEED RACK WEIGHT LIMIT)
