Propox MMnet102, User Manual

Page: 8 / 36

8
J1
No. Function Alt. function Description
1 AD7
2 AD6
3 AD5
4 AD4
5 AD3
6 AD2
7 AD1
8 AD0
Data bus. Allows connecting externals peripherals mapped in
microcontroller address space. Peripheral addressing is done
with use of SEL1, SEL2 and/or A0, A1, #WR, #RD outputs.
9 A1
10 A0
Lowest two bits of address bus. Allows addressing 4 input and 4
output registers.
Note: outputs operate in 3.3V logic level standard.
11 SEL2
12 SEL1
Read/write strobe or address decoder outputs.
Note: outputs operate in 3.3V logic level standard.
13 PE7 INT7
PE7 – General purpose digital I/O
Alternative functions:
INT7 – External Interrupt source 7: The PE7 pin can serve as an
external interrupt source.
IC3 – Input Capture Pin3: The PE7 pin can act as an input
capture pin for Timer/Counter3.
14 PE6 INT6
PE6 – general purpose digital I/O
Alternative functions:
INT6 – External Interrupt source 6: The PE6 pin can serve as an
external interrupt source.
T3 – Timer/Counter3 counter source.
15 PE5 INT5
PE5 – general purpose digital I/O
Alternative functions:
INT5 – External Interrupt source 5: The PE5 pin can serve as an
External Interrupt source.
OC3C – Output Compare Match C output: The PE5 pin can serve
as an External output for the Timer/Counter3 Output Compare C.
The pin has to be configured as an output (DDE5 set “one”) to
serve this function. The OC3C pin is also the output pin for the
PWM mode timer function.
16 PE4 INT4
PE4 – general purpose digital I/O
Alternative functions:
INT4 – External Interrupt source 4: The PE4 pin can serve as an
External Interrupt source.
OC3B – Output Compare Match B output: The PE4 pin can serve
as an External output for the Timer/Counter3 Output Compare B.
The pin has to be configured as an output (DDE4 set (one)) to
serve this function. The OC3B pin is also the output pin for the
PWM mode timer function.
17 PE3 AC-
PE3 – general purpose digital I/O
Alternative functions:
AC- – Analog Comparator Negative input. This pin is directly
connected to the negative input of the Analog Comparator.
OC3A, Output Compare Match A output: The PE3 pin can serve
as an External output for the Timer/Counter3 Output Compare A.
The pin has to be configured as an output (DDE3 set “one”) to
serve this function. The OC3A pin is also the output pin for the
PWM mode timer function.
18 PE2 AC+
PE2 – general purpose digital I/O
Alternative functions:
AC+ – Analog Comparator Positive input. This pin is directly
connected to the positive input of the Analog Comparator.
XCK0, USART0 External clock. The Data Direction Register
(DDE2) controls whether the clock is output (DDE2 set) or input
(DDE2 cleared). The XCK0 pin is active only when the USART0
operates in Synchronous mode.