Charging Socket
On/Off Switch
3
4
SYNCING YOUR X02
Important! When syncing your X02 quadrocopter with the controller always make sure that the
quadrocopter is on a flat level surface and that your digital trim settings are in the center position.
This ensures that the 6 Axis gyro is properly programmed to mimic your trim settings.
Your X02 utilizes an automatic 2.4G channel selection system that allows up to 8 people to fly side by side
in the same wireless range with no interference.
For One-Person Play:
1. Before starting, make sure that the power on both your controller and X02 are in the OFF
position. Make sure that there are no other 2.4G devices in the area as well.
2. Turn ON the X02 and set it down on a flat level surface. The LED indicator lights of the X02
should begin to flash rapidly.
3. Turn ON the remote, you will hear two beeps. Push the throttle all the way forward(1 beep) and then
pull the throttle all the way back. A 2nd beep will sound and the two front white LED lights should turn
to solid. This indicates your controller and the quadrocopter are successfully synced. If not, repeat above steps.
For Multi Person Play:
4. Before starting, make sure that the power on all X02 drones and controllers are in the OFF
position. Make sure that there are no other 2.4G devices in the area.
5. Each person will have to sync their X02 individually at a different time to avoid interference.
Follow steps 1 to 3 above making sure that no one else is syncing at the same time.
6. After syncing a player’s X02, it should be left ON until all players have synced their X02
quadrocopters.
7. Should there be a mistake or interference, all players must turn off their controllers and X02
quadrocopters for 60 seconds and then begin the process again.
PREPARING FOR FLIGHT
• Verify that there are 2 “AAA” batteries inside the remote control unit and the X02 has been
fully charged.
• Make sure your X02 and controller are both turned on and synced together.
• Make sure to be in a large space with an open radius of at least 50 feet.
• Make sure the empty space has no obstacles and water close by. Set your X02 on a clean flat level
surface before take-off.
DO NOT ATTEMPT TO FLY YOUR X02 IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR LIGHTNING
OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND POSSIBLY EVEN CAUSE BODILY HARM.
FLYING TIPS
• It is recommended that you operate the X02 in a wide open space. The ideal space should have a
200 foot radius.
• Parental guidance or adult supervision is suggested at all times.
• If you are flying the X02 with others, make sure all spectators are behind you.
• For best performance, it is recommended that you operate the X02 in zero wind conditions,
as wind can greatly affect the performance of the aircraft.
DO NOT FLY YOUR X02 IN FOUL WEATHER!
WARNING
Front Rotor Blades
Rear Rotor Blades
X02 DIAGRAM
Digital Camera
REMOTE CONTROL DIAGRAM
Speed Setting Button
Speed Indicator
Throttle/Yaw
360˚ Stunt Rolls Button
Direction Control
Power On/Off
4CH
3CH
4 CH Mode
Removable Grip
3 CH Mode
Left Bank Trim
Right Bank Trim
Forward Trim
Power Indicator
Backward Trim
1 2
T
H
3 4 C
3
Camera/Video
CALIBRATE
VIDEO
CAMERA
STUNT
START/LAND
SPEED
