PROPAIN Ekano 150, Quickstart- / Assembly Instructions, Page: 18 / 182

1 2
A
B
C
D
D
D
D
// BEFORE YOUR FIRST RIDE
PROVISIONS FOR USE
Observe the basic provisions for the EKANO:
INTENDED USE
The intended use of Bikes is divided into five different
categories – ranging from the use on paved roads through to
downhill or freeride use.
The EKANO must only be used in accordance with the
provisions of Category 4 or below.
Details can be found in the user manual of your bike.
PERMISSIBLE TOTAL MASS
The permissible total mass (rider + b equ
luggage) is 130 kg and may not be exceeded!
USER MANUAL
In addition to these instructions, please refer to the user
manual of your bike. All information contained therein must
have been read and understood!
REGULATIONS ACCORDING TO THE GERMAN TRAFFIC REGULATIONS
(STRASSENVERKEHRS-ZULASSUNGSORDNUNG STVZO)
If you want to use the EKANO on public roads, a front and rear light, a white front reflector, a red rear reflector and spoke
reflectors must be attached to the EKANO. If pedals are fitted retrospectively, make sure that they have yellow reflectors that act
forwards and backwards.
These regulations are for the use on public roads in Germany. If the bicycle is used in another country, the requirements
applicable there must be observed.
Pos. Description Special notes
A front light and white
reflector
The front and rear lights and reflectors must be fitted at dusk, in the dark or whenever
required by visibility conditions. The lights and reflectors must be fixed during operation and
be protected against accidental movement under normal operating conditions and must
be permanently operational. The front light must be set so that other road users are not
blinded. The lights and reflectors must not be covered.
B rear light and red
reflector
C pedal reflector Both pedals must have yellow reflectors working forward and backward.
D spoke reflector Two spoke reflectors must be fitted to the front and rear wheel.